Delhi Police AWO/TPO20 Jan 2026Shift 3Modern Physics & Inventions

In the context of next-generation wireless communication, which of the following characteristics of Li-Fi technology distinguishes it from traditional Wi-Fi and creates both opportunities and limitations for its deployment in India's digital ecosystem?

अगली पीढ़ी के वायरलेस संचार (communications) के संदर्भ में, Li-Fi तकनीक की कौन-सी विशेषता पारंपरिक Wi-Fi से उसे भिन्न बनाती है, और भारत के डिजिटल तंत्र में इसके प्रयोग की संभावनाएँ एवं सीमाएँ किस प्रकार उत्पन्न करती हैं?

Answer और ExplanationAnswer and explanation

Answer: (B) Li-Fi uses visible and near-infrared light spectrum, which allows higher data transmission rates but limits operation to line-of-sight environments.

क्यों
Li-Fi (लाइट फ़िडेलिटी) किसी LED को इतनी तेज़ी से on-off करके डेटा भेजता है कि आँख को पता नहीं चलता। प्रकाश (light) की आवृत्ति (frequency) रेडियो तरंगों (radio waves) से बहुत ऊँची है, इसलिए वह अधिक डेटा ले जा सकता है, पर प्रकाश दीवारों से नहीं गुज़रता, इसलिए रिसीवर को लैंप की सीधी रेखा में होना चाहिए।
बाकी विकल्प क्यों नहीं
•
(A) Li-Fi मिलीमीटर तरंगें (waves) नहीं, प्रकाश इस्तेमाल करता है, और प्रकाश दीवारों से नहीं गुज़रता।
•
(C) Li-Fi साधारण प्रकाश-आधारित संचार (communications) है; यह क्वांटम उलझाव पर निर्भर नहीं।
•
(D) Li-Fi प्रकाश इस्तेमाल करता है, अति-निम्न आवृत्ति की रेडियो तरंगें नहीं।
इस प्रश्न के आस-पास
•
Li-Fi को हरल्ड हास ने (2011) पेश किया।
•
Wi-Fi रेडियो तरंगें (2.4 और 5 GHz) इस्तेमाल करता है; Li-Fi दृश्य प्रकाश।
•
LED को एक सेकंड में लाखों बार on-off किया जा सकता है।
•
नीले LED (अकासाकी, अमानो, नाकामुरा) को 2014 का भौतिकी (physics) नोबेल मिला और इसी से सफ़ेद LED रोशनी संभव हुई।
•
प्रकाशीय तंतु (optical fibre) पूर्ण आंतरिक परावर्तन (total internal reflection) से लेज़र या LED प्रकाश ले जाते हैं।
•
प्रकाश दीवारों से नहीं गुज़रता, इसलिए Li-Fi अधिक सुरक्षित पर कम दूरी का है।
Why
Li-Fi (Light Fidelity) sends data by switching an LED on and off extremely fast, too fast for the eye to notice. Light has a far higher frequency than radio waves, so it can carry more data, but light cannot pass through walls, so the receiver must be in the line of sight of the lamp.
Why not the others
•
(A) Millimetre waves are not what Li-Fi uses, and light does not pass through walls.
•
(C) Li-Fi is ordinary light-based communication; it does not depend on quantum entanglement.
•
(D) Li-Fi uses light, not ultra-low-frequency radio waves.
Around this question
•
Li-Fi was introduced by Harald Haas (2011).
•
Wi-Fi uses radio waves (2.4 and 5 GHz); Li-Fi uses visible light.
•
LEDs can be switched on and off millions of times a second.
•
The blue LED (Akasaki, Amano, Nakamura) won the 2014 Nobel Prize in Physics and made white LED lighting possible.
•
Optical fibres carry laser or LED light by total internal reflection.
•
Light cannot pass through walls, which is why Li-Fi is more secure but shorter-range.

Source: Delhi Police AWO/TPO · 20 Jan 2026 · Shift 3। Solution: Prashant Sir, Sarvagya।Source: Delhi Police AWO/TPO · 20 Jan 2026 · Shift 3. Solution by Prashant Sir, from Sarvagya.